Static Bypass Switches

The Static Bypass Switch takes two sources of power at the input and monitors them continuously to provide the better of the two available powers to the electrical load connected at the output. One source is used as master and the other as slave. The load runs normally on the master and in any case of deviation of voltage and frequency from the defined threshold, the load instantly transfers to the slave source to provide uninterrupted supply to load. It is based on solid-state switch’s Silicon Controlled Rectifier (SCR), devices so it has no mechanically moving parts, thus requires minimal maintenance. It provides fast transfer time to protect the output load. The input sources can be a combination of UPS supply, mains supply or generator supply providing sinusoidal output. The Static Bypass Switches has high overload handling capability for safety.

Typical applications include servers, data centers, call centers, operation theatres or any other place which requires redundant power supply with fast transfer time so that load connected at the output does not experience any power break.

Su-Kam’s Single Phase and Three Phase Static Bypass Switch ensure high reliability and redundancy of power supply to the critical load.

Single Phase Static Bypass Switch (SBS) – Salient Features:

  • Micro-controller based design
  • 230 VAC, 50Hz input/output
  • Power: 1KVA-5KVA, 6KVA-10KVA
  • Provides redundant power to load by two independent power sources
  • Operates with two UPS or non-UPS power sources (grid or generator), providing a sinusoidal output
  • Fast transfer time
  • High surge current capability
  • Compact and robust design
  • Hot swap function of input sources i.e. servicing of one of the sources can be done without interrupting the power flow to load
  • User friendly LED display
  • RS-232 Communication for monitoring

Three Phase Static Bypass Switch (SBS) – Salient Features:

  • Digital Signal Controller based design
  • 451VAC, 50HZ input/output
  • Power: 5KW – 10 KVA, 11KVA-25KVA, 26KVA-50KVA
  • Provides redundant power source for load
  • Operates with any UPS or power source that has sine wave output
  • Fast transfer time
  • High surge current capability
  • Compact and robust design
  • Hot swap function of input sources i.e. servicing of one of the sources can be done without interrupting the power flow to load
  • User friendly LED display
  • RS-232 Communication for monitoring

Share

Comments

comments

  1. We need this Static bypass switches for our three UPS s.Kindly provide your contact details at Delhi.Our address is as below.
    UT Pumps & Systems Pvt Limited,
    14/7,Mathura Road,
    Faridabad – 121003
    Contact person : M.Ravi Kumar
    Phone : 9911399008

Leave a Reply

Your email address will not be published. Required fields are marked *